|
|
INFORMATION DETAILS
ID: 13651509
|
Year: 2017
|
Make: Hardi
|
Model: Ranger 550
|
Type: New
|
MSRP:
N/A |
Engine Size - cc: N/A |
Pumps type : | ACE 150 |
Boom: | 45 or 60 |
Hydraulic outlets needed (HY models): | 1 single + 1 double acting |
Hydraulic outlets needed (HV models): | 1 double acting |
Hydraulic outlets needed (HZ models): | 1 double acting |
Hydraulic outlets needed (HZ-DHP models): | 1 double acting |
Weight drawbar (empty tank)*, lbs: | 360 |
Weight total (empty tank)*, lbs: | 3470 |
Total length*, in : | 213 |
Total height*, in: | 114 (11.2 x 38 tires) |
Width with boom in transport position*, in: | 120 |
Track width, in: | 60 to 90 |
SELLER DESCRIPTION
|
Features
|
Chassis
Adjustable axle
|
-
The axle is easily adjustable in 2" steps
-
Simply loosen the bolts and place them in other positions
-
60" – 90"
|
Crop clearance
-
Good crop clearance
-
The chassis is designed in a way that reduces crop damages to a minimum
-
Ground clearance underneath the axle is 27 inches (38" tires) and 24 inches (28" tires)
|
Tanks & agitation
-
Main tank - 550 gal.
-
Rinse tank capacity: 63 gal. (Optional on 550)
-
Clean Water Tank: 5 gal.
-
Very durable UV protected Polyethylene
-
Very low center of gravity
-
Sloping forwards for excellent weight distribution and effective agitation
-
Easy to rinse inside with tank rinsing nozzles
-
Smooth surface means the exterior is easily cleaned
-
Can be equipped with a complete rinsing system which flushes the control unit, pump, filters and boom lines
-
Adjustable pressurised agitation system allows the operator to maximize or reduce agitation
|
Liquid systems
HARDI diaphragm pump
Ace Centrifugal Pumps
-
Lower purchase cost
-
High volume - low pressure
-
Hydraulic or PTO driven
|
Tanks & agitation
-
Main tank - 550 gal.
-
Rinse tank capacity: 63 gal. (Optional on 550)
-
Clean Water Tank: 5 gal.
-
Very durable UV protected Polyethylene
-
Very low center of gravity
-
Sloping forwards for excellent weight distribution and effective agitation
-
Easy to rinse inside with tank rinsing nozzles
-
Smooth surface means the exterior is easily cleaned
-
Can be equipped with a complete rinsing system which flushes the control unit, pump, filters and boom lines
-
Adjustable pressurised agitation system allows the operator to maximize or reduce agitation
|
BOOMS
EAGLE boom 45 to 66 feet
EAGLE features
-
45, 50, 60, & 66 feet
-
Forward and rearward spring-loaded breakaway
-
The nozzles, spray lines and hoses are all well protected within the boom design
-
Rugged two-dimensional structure and a coil spring self-stabilizing trapeze boom suspension
-
Yaw dampening of horizontal movements is integrated through 4 individual rubber buffers located on the center section
|
HARDI ISO nozzles
-
The HARDI ISO nozzle series is the most complete nozzle series on the market, ensuring that nozzles of all relevant sizes are available for all spray jobs.
-
HARDI nozzles are made of SYNTAL which is the most durable material for nozzles.
-
Nozzle type and size should balance the need for optimal biological effect with a consideration for wind drift & sprayer capacity.
-
HARDI nozzles can be fitted on all sprayer brands
|
Controllers
HC 2500
HC 2500 features
-
Simple to use
-
Permits automatic control of volume rate
-
Audio/ visual alarms
-
8+1 registers
|
HC 5500
HC 5500 features
-
Advanced farming ready with up to 98 registers.
-
Connection possibility with a site specific application map or a remote sensor.
-
Operator is instantly informed of operation status and warned when vital parameters like pressure, speed, etc. are not correct.
-
Easy to read display for day or night use with 4 lines of information displayed simultaneously.
-
Short cut keys to display vital information.
-
Volume rate can be changed on the go.
-
The distance or area untreated is constantly calculated.
-
The basic sprayer functions can be operated without the computer.
|
HC6500
-
Designed specifically for spraying and easy to use
-
Intuitive controls
-
Safer, faster and easier with intelligent options
-
Comfortable joystick for the most used functions
-
Color screen with excellent readability in sunlight and darkness. It shows six information windows
-
All information available at a quick glance
-
Help function that is always active so the operator is never in doubt
|
ISOBUS compatible
The HARDI COMMANDER i sprayer can be operated with a virtual ISOBUS terminal. The customer can order an intelligent HARDI sprayer and use the intelligent functions like AutoWash and PrimeFlow direct from his own ISOBUS terminal.
To make the complex sprayer operation easier, the proven HARDI GRIP will be delivered with the COMMANDER i sprayer so all primary spray functions, such as on/off and section switches as well as the hydraulic operation can easily and safely take place by means of a joystick. Also a SetBox will be used to operate sprayer specific equipment as TWIN air assistance or SafeTrack steering directly. Integrated AutoSectionControlIf the existing Virtual terminal has an automatic section control, following the de-fined task controller function of the ISOBUS standard, for example the John Deere Sprayer Pro, the ISOBUS terminal can operate the distribution valves of the COMMANDER, so the customer does not need a separate HARDI AutoSec-tionControl. UpdatingExisting COMMANDER i sprayers can be updated to an ISOBUS sprayer. That is also possible for sprayers which will now be ordered with the HARDI CONTROLLER 6500. The customer only has to buy the ISOBUS bridge, so the ISOBUS terminal can communicate with the HARDI jobcom. |
Back
|
|
|
|