|
Outstanding flexibility with 3 jobs from 1 machine. Bed loose housing and cubicles, as well as processing short straw for feed.
Available in 3 of our most popular models as the mounted 7150 or trailed 8150 and 8550.
• 64,500 chops/minute for a fine and consistent output.
• Process up to 6 tonnes/hour at a chop length of 5cm.
• Outstanding 'Flow Plus' Performance to save you money
Faster, stronger, and now incorporating FlowPlus:
• Greater output
• More consistent feed rate
• Controlled delivery at low fan speeds
Reliability
With simple and robust driveline and controls, the Tomahawk works harder for you 24/7 every day of the year.
British built and backed
Innovative design is put into practise with Tomahawks being manufactured to exacting standards in our modern production facility. Stringent quality control in production is matched by an efficient after-sales service to ensure your peace of mind.
To keep your Tomahawk looking like new for longer, components are shot blasted and protected with heat cured powder coat paint.
|
|
Features
|
|
 Chop short/spread long at the touch of a button
The Dual-Chop system incorporates a set of retractable blades that can be repositioned at the touch of a button, changing straw output from short chop (around 4cm) to no chop, and back again when desired in a matter of seconds.
|
 Heavy Duty Bed Chain
12mm heavy duty bed chain, resulting in less tensioning adjustments. The chain does not have anything welded to it which would lower it?s strength. |
 Visual Feedback
An indicator confirms the movement of the floor. The hydraulic Motor driving the floor is not vulnerable to damage. |
 Electric Controls
Robust intuitive electric controls with high flow hydraulic valve for easy, trouble free fingertip control. |
 8 Paddle Fan
The fan has 8 paddles, 230mm width from 6mm steel. Rotor diameter 1.5m. The paddles can be individually replaced if damaged. The wide paddles blow more air, and so blow straw further. |
 Tailgate Mechanism and Under Floor Panel
The Rear Door has two hydraulic cylinders to reduce stress on the chassis. The Tomahawk has an underfloor panel fitted; useful for maintenance. |
 High Performance Valve
Hydraulic valve can take up to 60 litres/minute, resulting in less heating of the oil, and faster response to the controls. |
 Tailgate Switch
Remote control tailgate & bed chain switch, to make loading easier. (Option on 7150) |
 Robust Transmission
Chain drive to crossbeater ensures reliable transmission of maximum power. |
 Easy Loading
Tailgate is flared for easy loading and is supported by two hydraulic rams to enable the heaviest of bales to be loaded. |
 Consistent Output
The bale restraint design works with the grippers on the slats to give a good tumbling action, ensuring a consistently high discharge rate with all materials. |
 Adjustable Feed Slide
For accurate placement of feed materials. |
 Swivel Chute
For flexibility of delivery, the chute rotates 280? allowing material to be directed to where it is needed. An adjustable feed slide is fitted for accurate placement of feed materials. |
 Easy Maintenance
If a foreign object causes damage to the paddles they can be removed, repaired or replaced without removing the fan or splitting the machine. |
 Slip and overrun on PTO
For driveline protection a slip clutch is fitted as standard on the PTO shaft. |
 Clevis Drawbar and Jack |
 Hydraulic Filter
In-Line high pressure filter stops contamination from damaging the hydraulic system. |
Address:
