|
|
|
Documents:
|
|
INFORMATION DETAILS
ID: 13662771
|
Year: 2024
|
Make: Patz
|
Model: 12- and 16-Inch Movable Plow Belt Conveyors/Feeders
|
Type: New
|
MSRP:
N/A |
Engine Size - cc: N/A |
SELLER DESCRIPTION
12- and 16-Inch Movable Plow Belt Conveyors/Feeders
An economical way to automate your operation. |
- Move feed, wood by-products, recycled materials, separated manure fibers, poultry litter, compost materials, and other bulky materials
- Select from one-way or two-way movable plow directing material to multiple locations
- Plow operation with either one or two-motor drive
- Choice of belt widths ranging from 12 inches to 16 inches (305mm to 406mm)
- Choose from a variety of overall lengths ranging from 20 ft to 200 ft (6.1 m to 60.9 m)
- Choice of mounting configurations, including ceiling, side, and floor mounts
|
Specifications
|
|
Belt Width |
Belt Speed
|
Overall Length |
Full Load Capacity |
8912 |
12 in. |
370 ft (113 m) per minute |
Up to 120 ft. (36.58 m) |
maximum 1000 lbs (454 kg) per minute |
8916 |
16 in. |
370 ft (113 m) per minute
|
Up to 100 ft. (30.48 m) |
maximum 1600 lbs (726 kg) per minute |
1608 |
16 in. |
390 ft (119 m) per minute |
Up to 200 ft. (60.96 m) |
maximum 1690 lbs (767 kg) per minute |
|
|
Standard Features and Options
|
Adjustable Decline Elbow
Elevate materials and then convey level with an adjustable decline elbow (0° - 30°). The belt stays concave with a deep trough when passing over the elbow for maximum capacity. |
12- to 16-Inch Belts
Choose 12-inch or 16-inch belt with concave, deep-trough design for maximum capacity. Customized lengths up to 120 feet. |
One-Way Floating Plow
The one-way floating plow drops feed off one side of the feeder only, but can feed up to two lots different rations by using the 2-motor drive feeder. |
Two-Way Floating Plow The two-way floating plow can plow off either side of the belt and is also used if you wish to reverse the belt for adding feed at various points. A remote electrical control is used to switch feeding from one side of the bunk to the other. Feed up to four lots different rations by using a 2-motor drive feeder and a plow drive assembly. An optional deflector on the plow drops feed closer to the feeder. |
Open-Pan Design
Open-pan design provides deep trough for extra capacity and reduces belt friction for lower power requirements. Fin pulley helps avoid feed buildup. |
One Motor Drive
One motor drives both the belt and plow (roller-chain drive) to feed one lot, or to feed two lots different rations when the bunk is split lengthwise. The plow reverses around a pulley automatically and smoothly at each end of the feeder with continuous-loop cable drive. |
Back
|
|
|
|