Specifications
	Motor	Cable Options	Maximum Scraped Alley Length (SAL)	Maximum Total Circuit Length (TCL)	View Full Specs
IntelliCable® Pro II	¾ horsepower electric motor	³⁄₈" Galvanized or Stainless Steel ⁷⁄₁₆" Galvanized or Stainless Steel ½" Galvanized or Stainless Steel ³⁄₈" Cable with Plastic Jacket	½" cable: 215 feet (66 m) ⁷⁄₁₆" cable: 250 feet (76 m) ³⁄₈" cable: 280 feet (85 m)	½" cable: 850 feet (259 m) ⁷⁄₁₆" cable: 1000 feet (305 m) ³⁄₈" cable: 1100 feet (335 m)
IntelliCable® Pro III	¾ horsepower electric motor		½" cable: 440 feet (134 m) ⁷⁄₁₆" cable: 510 feet (155 m) ³⁄₈" cable: 570 feet (174 m)	½" cable: 1760 feet (536 m) ⁷⁄₁₆" cable: 2040 feet (622 m) ³⁄₈" cable: 2280 feet (695 m)
Standard Features and Options

SENSOR CONTROL
Drive unit design includes sensor disc and proximity sensors to provide the control panel with necessary information to keep track of scraper's position and direction.

2

SENTINEL CONTROL PANEL
Advanced learning system continuously adjusting to weather, bedding, and manure changes by recalculating the amount of energy required to clean on every cycle.

• Patz innovative Auto-Tensioning option
  Superior sensitivity - programmable BUMP feature.

• Advanced “Patz Remote Notification” emails and/or text messages operator(s) with scraper status and service updates. Transmits updates following corrective service.

• Faults are stored in memory up to 4 weeks—even if power is cycled.

• Allowing service technicians to quickly troubleshoot.

3

CHOICE OF CABLE

For Pro II or Pro III Units:

• 3/8" Galvanized or Stainless Steel Cable
• 7/16" Galvanized or Stainless Steel Cable
• 1/2" Galvanized or Stainless Steel Cable
• 3/8" Plastic Jacketed Galvanized Steel Cable: Cow-friendly with superior wear resistance against stretching, fraying, sand, sawdust, and manure! Provides longer service life than steel cable.
• 4

• SELF-LOCKING RATCHET SYSTEM
  The self-locking ratchet system allows easy tightening of cable.

  5

  PATZ PROVEN PERFORMER CORNER WHEEL
  16” (406 mm) diameter cast iron corner wheels feature stainless steel fasteners as standard components. Corner wheels accept 3/8”, 7/16” or 1/2” cable. Phenolic with graphite sleeve bearings for longer life.

  6

  FOLDING ANGLED TIP-UP SCRAPER
  Wings pivot to follow wall tightly for better cleaning; blades tip up and the wings pivot inward on reverse movement. Suitable for alleys with widths from 84 to 192 inches (2.1-4.9 m).

  7

  VERSA FOLDING V SCRAPER
  This versatile, low-profile scraper is available in 6, 8, 10, 12, and 14 foot sizes to clean alleys with widths from 64 to 174 inches. Choose from three economical, replaceable blade edges: AR400 steel, rubber, or urethane.

  8

  CHOICE OF SLEDS

  Standard or short sleds available. Standard 57" (1,448 mm) sleds provide better scraper stability, while 37" (940 mm) sleds are available where a shorter sled is required.

  9

  FOR RUBBER FLOORING
  Hard nylon rollers located on sled ends and scraper arms position the scraper above the rubber covered alleys, ensuring only rubber blades touch rubber flooring.