|
|
|
INFORMATION DETAILS
ID: 13667402
|
Year: 2017
|
Make: Kverneland
|
Model: CLC pro Classic
|
Type: New
|
| MSRP:
N/A |
Engine Size - cc: N/A |
SELLER DESCRIPTION
|
CLC pro classic - A "pro" for Smaller Tractors
The CLC pro Classic is a 3-bar cultivator for smaller tractors (from 90hp). Based on the CLC pro the Classic variant is equipped with an easy and compact module for rear accessories. Available as rigid from 9'8" - 11'5" (3 - 3.5m) and 13'1" (4.0m) as folding version. To make the CLC pro Classic very compact and to reduce the weight as much as possible, the parallelogram carries two curved arms that reduce the overhang of the machine. A section of levelling tines is directly connected to the roller frame. Lighter than discs, the tines ensure an excellent levelling result in all conditions. The working depth and aggressiveness of the levelling tines is infinitely adjustable.Therefore the CLC pro Classic is 50cm shorter than the CLC pro; this shifts the centre of gravity closer to the tractor. The aim of developing a „pro“ for smaller tractors is thus achieved.
|
|
The Advantages:
|
-
High Horse power capacity to cope with all conditions and tractor sizes from 90 to 350 hp
-
Universal Cultivator from 9'8" to 16'1" (3.0 to 4.9m), working 5 to 30cm deep
-
3 bar frame for optimum mixing and blockage free operation
-
Unique leg design vibrating for intensive effect in the soil but low fuel consumption
-
Wide choice of shares, rear rollers and levelling equipment
-
Intensive mixing of the residues
-
Seedbed finish possible
|
|
Model |
Working width |
No. of tines |
Average tine spacing (mm) |
Min./Max. HP |
|
CLC pro 300 Classic |
9'8" (3.0m) |
10 |
280 |
120 / 240 |
|
CLC pro 350 Classic |
11'5" (3.5m) |
12 |
280 |
135 / 270 |
|
CLC pro 400F Classic |
13'1" (4.0m) |
13 |
290 |
185 / 300 |
|
|
Highlights
|
Strong Frame CLC pro
-
The frame design and heavy-duty central beam offers in-field durability even under extreme working conditions.
-
The machine offers high underbeam clearance with 870mm to cope with incorporation of high volumes of crop residue.
-
The frames can absorb e.g. 240 hp with 3.00m and up to 350hp for the folding implements with 5.0m.
-
The material used can bear significant loads while staying reliable and light.
-
The weight carried by the tractor is thus reduced and helps saving fuel.
-
The CLC pro Classic is 50cm shorter than the CLC pro, shifting the centre of gravity closer to the tractor.
-
CLC pro Classic: The parallelogram carries two curved arms that reduce the overhand of the machine
|
Tines and Shares
-
The unique and robust design of the tines incorporates a specially heat treated hollow “C” profile.
-
The heat treatment is of the same standards as the beams on the Kverneland ploughs.
-
The tine leg can withstand sideway movements of up to 20cm. This means lower stress to the tine holder and frame structure.
-
The CLC tines are suitable to work at 40 cm depth to fight plough pans and to encourage natural drainage, even in stony soils.
-
The removal of soil compaction allows intensive rooting in the lower soil layers. The plants therefore gain access to nutrients and water reserves at these deeper soil levels.
-
For operation in rather abrasive soil, Kverneland offers the option of carbide faced shares and wing shares (not recommended for stony soil).
-
The carbide faced parts last 5 to 12 times longer than the standard ones
-
The wing share is the right choice for shallow stubble cultivation.
-
The CLC Evo Wings is still very versatile. The wings can be removed to work deeper with just the reversible tines
|
Leaf Spring/Vibromat
-
For lighter conditions Kverneland offer the CLC tine with shearbolt overload protection.
-
This version of the CLC tine offers the same high quality as that of the „Auto-reset“ tine, and is releasing from 2 tons.
-
The Kverneland CLC tine equipped with the “Auto-reset“ leaf spring safety system is the perfect choice for hard and stony conditions.
-
The well renowned Kverneland leaf spring protects the tines against overload.
-
The release pressure can be adjusted if required.
-
All pivot points of the CLC tines are manufactured with wear resistant bushes and bolts of the renowned Kverneland quality.
-
Therefore the CLC tine system is maintenance-free
|
|
Rear Accessories CLC Evo
There is a full range of levelling equipment and rear rollers available:
Levelling discs
-
Rubber spring loaded, to follow the ground and protect
-
Border discs as standard
Levelling tines
-
Good levelling capacity
-
Good following of the ground contou
|
|
Combi disc harrow:
-
Combination of a single disc gang with all roller type
|
|
Double disc gang diameter 510 mm
-
Leaves a rough surface with aggregates ready for wintering, interesting at the end of autumn season for preparing spring fields and crops
|
|
Flexline diameter 585mm
-
Good reconsolidation of light soil
-
Universal and suitable for all soil types
|
Cage roller diameter 550mm
-
10 bars for a good loading capacity and operation in wet conditions
-
Effective crumbling action
|
Double cage roller diameter 400mm (tube/flat)
-
Good crumbling
-
Precise depth control
|
|
Actipack:
-
The Kverneland Actipack roller displays its superb working qualities especially on medium to heavy soils.
-
The integrated cutting discs break the larger clods whilst the adjustable knives cut the remaining clods resulting in optimal clod breakdown.
Actiring:
-
The Actiring roller is a lighter variant of the Actipack, using the same frame structure and knife system.
-
The discs have been replaced by a “V” profile ring, this is saving 50kg/m, which is of critical importance for reducing lifting requirements for mounted equipment.
|
|
Back
|
|
|
|
Address:
