|
|
|
INFORMATION DETAILS
ID: 14320066
|
Year: 2019
|
Make: Cross Tech
|
Model: 7200 LF – Low Flow
|
Type: New
|
| MSRP:
N/A |
Engine Size - cc: N/A |
| Operating Equipment: | Skid Steer Loader |
| Cutting Width: | 72'' |
| Auxiliary Hydraulic Flow: | 15-20 GPM |
| Max Cutting Capacity: | 3'' |
| Weight: | 1,168 lbs |
| Overall Length: | 84.250'' |
| Overall Width: | 73.750'' |
| Deck Thickness: | 250'' |
| Blades: | (2) .500'' x 4.000'' (High Strength, Updraft) |
| Blade Carrier Type: | 1.000'' Bar Welded to .313'' Spun Formed Pan |
| Blade Rotation: | Counter Clockwise |
| Motor Protection: | Pressure Reliefs |
| Operating PSI Cont /Int : | 3000/3500 |
| Optional Blades: | (4) 0.62'' x 5.188'' (High Strength, Flat) |
| Hydraulic Hose with Protective Wrap: | Standard 78'' - Custom lengths available upon request |
| Use: | Heavy Duty – clearing of up to 4'' diameter brush |
| Motor/Gearbox Coupler: | Machined Steel |
| Drive Protection: | GRD-2 Bolt (Shear Bolt) |
SELLER DESCRIPTION
|
The 7200 Low Flow Brush Wolf model will clear a 72″ path of grasses, shrubs and overgrowth. The suction and long-lasting high tempered steel blades will clip through brush and saplings up to 3″. The balanced stump jumper prevents vibration, and a welded collar on the bottom of the deck helps prevent damage to the gearbox seal. Galvanized 5/16″ safety chains on the front and rear protect against flying debris and aid in mulching. The front chains are replaceable. The solid one piece of formed 1/4″ steel deck will stand up to your workload for years to come. You’ll have exceptional performance because each Brush Wolf model has been engineered with the right motor and gearbox to optimize the full capacity of your operating equipment. Three year warranty on the structural steel. |
|
Each Brush Wolf model is paired with the correct hydraulic motor and right angle gear box to achieve the highest torque available from your equipment while maintaining a proven tip speed ideal for brush cutting applications. Power, performance and reliability are built-in. It is important to know the auxiliary hydraulic flow in gallons per minute, as well as the cutting diameter you’d prefer, which should be slightly wider than your loaders wheel base. The auxiliary hydraulic flow required for the Low Flow model is between 15 – 20 gallons per minute. You’ll find the right Brush Wolf model to make the most of your skid steers power with options available in: low flow, standard or high flow. You can count on Brush Wolf to handle your workload now and in the future.
All models are designed, fabricated, powder coated, assembled and tested in Crosslake, Minnesota. Each Brush Wolf model comes standard with hoses, couplers and gearbox seal guard. Experience the reliability and the durability of Brush Wolf products.
|
Available Colors
 Flat Black
 Yellow
|
Back
|
|
|
|
Address:
