|
|
|
INFORMATION DETAILS
ID: 14327220
|
Year: 2019
|
Make: Wallenstein
|
Model: WP1624
|
Type: New
|
| MSRP:
N/A |
Engine Size - cc: N/A |
| 3-POINT HITCH MOUNT: | CATEGORY 1/11 |
| RECOM MIN HP: | 45 |
| GPM RECOM HYD FLOW: | 12-18 |
| CYLINDER DIAMETER/STROKE: | 4.5 |
| FULL STROKE SPLITTING CYCLE TIME: | VARY BY TRACTOR |
| SPLITTING FORCE: | 20/25 TON @ 2550/3000 PSI |
| MAX SPLIT LENGTH: | 22 |
| MAX LOG DIAMETER: | 22 |
| WEDGE CONFIGURATION: | ADJUSTABLE 4-WAY |
| DIMENSIONS (LXWXH): | 210 |
| WINCH: | HYDRAULIC |
| WINCH ROPE LENGTH: | 50' |
| WINCH PULLING FORCE: | 2000 LBS |
| MAX DISCHARGE CHUTE HEIGHT: | 54 |
| Split Force:: | 20 Ton |
| Cylinder Diameter:: | 4'' (10 cm) |
| Split Opening:: | 26'' (66 cm) |
| Maximum Log Diameter:: | 18''(46 cm) |
| Minimum HP:: | 45 |
| Dimensions Open (LxWxH): : | 220 |
| Dimensions Folded (LxWxH): : | 232 |
| Total Weight:: | 3700 lbs (1450 kg) |
| Discharge Chute Height:: | 54 |
| Winch Rope Length:: | 50' (15 m) |
| Winch Rope Diameter: : | 1/4 |
| Winch Pulling Capacity:: | 1550 lbs (703 kg) |
| Full Stroke Splitting Cycle Time: : | Varies with Hydraulic Flow from Tractor |
| Mounting System:: | Cat I & II |
| Required Hydraulic Flow: : | 12 - 24 US gpm (45 - 91 lpm) |
| Engine:: | 747 CC Kohler CH752 |
| Dimensions Open (LxWxH):: | 232'' x 114'' x 76'' (589 cm x 289 cm x 193 cm) |
| Full Stroke Splitting Cycle Time:: | 6.5 Seconds |
| Tires:: | ST205/75R15 |
| Hitch:: | 2'' Ladder Style Ball Coupler |
| Hydraulic Tank Capacity:: | 26 US gal (102 l) |
| Recommended Log Diameter:: | 16'' (31 cm) |
| Maximum Log Length:: | 192'' (488 cm) |
| Log Trough Length:: | 150''(381 cm) |
| Log Deck Type:: | Folding Two-Stage Live Deck |
| Log Deck Height:: | 53'' (135 cm) |
| Log Deck Length:: | 70'' (178 cm) |
| Log Deck Width:: | 72'' (183 cm) |
| Bar Oiler:: | Automatic |
| Hydraulic Pump - Stage 1:: | 14 gpm (53 lpm) |
| Hydraulic Pump - Stage 2:: | 7.75 gpm (29.3 lpm) |
| Hydraulic Pump - Stage 3:: | 4.15 gpm (15.7 lpm) |
| Splitter Chute Clearance:: | 20 |
| Saw Bar:: | Oregon® 25 |
| Saw Drive:: | Hydraulic Gear Motor |
| Saw Chain:: | 18HX 0.404 |
| Average Cut To Cut Cycle Time: : | 12 Seconds |
| Throughput:: | 1.5 - 2.75 Cord Per Hour |
| Tongue Weight:: | 480 lbs (218 kg) |
| Fuel Tank Capacity:: | 10 US gal (38 l) |
| Saw Bar Oil Reservoir Capacity:: | 1.5 US gal (5.6 l) |
SELLER DESCRIPTION
N/A
Back
|
|
|
|
Address:
