|
|
|
|
Documents:
|
|
|
INFORMATION DETAILS
ID: 14460778
|
Year: 2019
|
Make: Bush Hog
|
Model: TD1500 & TD1700
|
Type: New
|
| MSRP:
N/A |
Engine Size - cc: N/A |
SELLER DESCRIPTION
|
TD1500 & TD1700
The Bush Hog® line of Tri-Deck Finishing Mowers are perfect wherever a well-groomed cut is needed. With available mowing widths of 15 or 17-feet, you can get the job done quickly with a Bush Hog Tri-Deck. Power requirements start at only 40 HP for the TD1500 and 45 HP for the TD1700. Chances are you already have a tractor that is compatible with at least one of these mowers. The TD line is well suited for golf courses, municipalities, sporting complexes, and homeowners with large acreages. The high blade tip speed and 6-inch deck overlap assures a uniform cut with no streaking. Built “Bush Hog Tough,” this line is designed to withstand thousands of hours of use with minimal downtime. The TD Series meets your expectations of quality mowers from “The Factory Where Legends Are Built.”
|
|
Perfomance Features
|
-
Smooth, Even Cut, Superior Distribution
-
15 &17-foot Cutting Widths
-
Blade Tip Speeds Over 18,000 FPM
-
Independent Deck Flotation
-
Wing Flex 30° Up And 10° Down
-
Adjustable Clevis Hitch
-
Standard Front Anti-Scalp Rollers
-
Narrow Transport Width
|
|
Construction Features
|
-
Reinforced Mainframe Construction
-
Heavy-Duty Aramid Cord Belts
-
Fabricated 7 Gauge Decks
-
Greaseable Blade Spindles
-
5 Year Limited Gearbox Warranty
-
Powder Coat Paint
-
Large Transport Wheels
-
Heavy-Duty Divider Gearbox
|
|
Product Features
|
 Heavy-Duty divider gearbox
|
 The adjustable clevis hitch and standard tongue jack allows one person to attach mower to the tractor.
|
 The 3 x 5-inches anti-scalp front roller is standard equipment for all decks.
|
|
Specifications
|
|
MODELS |
TD-1500 |
TD-1700 |
|
Cutting Width |
15 ft |
17 ft |
|
Cutting Height |
1 1/2 to 4 1/2-inches |
1 1/2 to 4 1/2-inches |
|
Deck Widths |
(1) 72-inches deck, (2) 60-inches deck |
(3) 72-inches deck |
|
Deck Construction |
7 gauge |
7 gauge |
|
Deck Overlap |
6-inches |
6-inches |
|
Blade Overlap |
1 1/2-inches |
1 1/2-inches |
|
Material Discharge |
Rear |
Rear |
|
Rear Chains |
Standard Equipment |
Standard Equipment |
|
Belt |
Single Aramid Cord “B” section per deck |
Single Aramid Cord “B” section per deck |
|
Gauge Wheels |
(12) 13-inches x 5-inches x 6-inches pneumatic w/ roller bearings |
(12) 13-inches x 5-inches x 6-inches pneumatic w/ roller bearings |
|
Tractor HP Required* |
40 HP minimum |
45 HP minimum |
|
Gearbox RPM |
540 |
540 |
|
Spindle RPMs |
3316 (60-inches), 2792 (72-inches) |
2792 |
|
Transport Dimensions |
95-1/2-inches wide, 95-1/2-inches high, 166-inches long |
95-1/2-inches wide, 107-1/2-inches high, 166-inches long |
|
Transport Tires (w/tapered roller bearings) |
(2) 23-inches x 9-1/2-inches x 12-inches |
(2) 23-inches x 9-1/2-inches x 12-inches |
|
Wing Flex |
30° up and 10° down |
30° up and 10° down |
|
Hitch |
Pull type/clevis, 3 position adjustable |
Pull type/clevis, 3 position adjustable |
|
Driveline Size |
Cat IV 80° CV (main), Cat. III wing |
Cat IV 80° CV (main), Cat. III wing |
|
Wing Deck Flex (independent of wing frame) |
10° side to side, 10° front to rear |
10° side to side, 10° front to rear |
|
Belt Adjustment |
Spring loaded idler |
Spring loaded idler |
|
Blade Tip Speed |
18,231 (60-inches), 18,272 (72-inches) FPM |
18,272 FPM |
|
Parking Jack |
Standard |
Standard |
|
Back
|
|
|
|
Address:
