|
|
|
INFORMATION DETAILS
ID: 16709025
|
Year: 2020
|
Make: H&S
|
Model: SUPER DUTY 7-4 FRONT & REAR UNLOAD FORAGE BOXES
|
Type: New
|
| MSRP:
N/A |
Engine Size - cc: N/A |
SELLER DESCRIPTION
SUPER DUTY 7-4
FRONT & REAR UNLOAD FORAGE BOXES
“Super Duty” Forage Boxes are available w/PTO Drive, Hydraulic Drive, or Electric-Over-Hydraulic Cab Controls.
Features common to all models:
-
1¾″ Stressproof Front Drive Shaft.
-
1¾″ Stressproof Rear Drive Shaft. (Front & Rear Unload Models).
-
Heavy Duty Gearbox System.
-
Heavy Drive Chains.
-
Spring Loaded Tighteners on Beaters.
-
Quick Release Cross Conveyor Clean Out Pan.
-
The rear unload drive system features a quick change pin.
-
A separate system allows you to start and clear the cross conveyor before you start the beaters or main apron conveyors.
-
A simple trouble-free variable speed drive lets you match just the right unload speed to the crop type, load condition and blower capacity.
-
H&S uses three – 18″ 4 bar H.D. spiral type beaters – not augers. Aggressive in handling tough material, they are even feeding. All three beaters are mounted in the head, not auxiliary panels in the box.
-
Beater shafts are 1¾″ equipped with greaseable bearings. A 4th beater is optional.
-
Super Duty frames feature heavy 5″ channel cross members and 2.5″ x 2.5″ side stakes.
In Addition to Common Features, PTO & Hydraulic Drive Model Features Include:
-
Variable Speed Pulley Driven System
-
12″ Spring Assist Bunk Extension (PTO).
-
24″ Hydraulic Extend/Retract Extension (Hyd).
In Addition to Common Features, Electric-over-Hydraulic Models Features Include:
-
No Belts or Pulleys.
-
The Electric-Over-Hydraulic “Super Duty” features Hydraulic valves with a variable Speed High/Low Main Apron Unload System and Control Box.
-
24″ Hydraulic Extend/Retract Extension.
|
|
Features
|
Beaters
H&S uses three – 18″ 4 bar H.D. spiral type beaters – not augers. Aggressive in handling tough material, they are even feeding. All three beaters are mounted in the head, not auxiliary panels in the box. Beater shafts are 1¼″ equipped with greasable bearings. |
Cross Z Iron
All Super Duty forage Boxes feature Cross Z-iron. Cross Zs are welded to the side channels in-line with stakes for added strength. |
Electric-Over-Hydraulic Drive System
NO BELTS OR PULLEYS - The Electric-Over-Hydraulic “Super Duty” features Hydraulic valves with a variable Speed High/Low Main Apron Unload System and Control Box. |
Hydraulic Extension
The hydraulic model has a 24″ Hydraulic Extend/Retract Extension. |
Quick Release Cross Conveyor Shield
The Quick Release Cross Conveyor Shield provides easy clean-out at the end of the season to eliminate corrosion |
Rear Unload Drive
A rear unload drive system with a quick change pin is standard on all Super Duty Forage Boxes. |
Safety Lock
On all rear unload boxes, once the tailgate safety lock is released, the self-locking mechanism unlocks automatically while unloading and locks shut when the tailgate closes. |
Spring Loaded Tighteners
Spring Loaded Tighteners on Beaters |
|
OPTIONS |
 Optional 4th Beater. |
 The optional side-to-side or front-to-rear electric roll tarp is a nice feature to keep that valuable forage from blowing out during transport.
Optional grain hopper. |
|
Specifications
|
|
24′ |
|
|
INSIDE WIDTH |
7′ 4″ |
|
INSIDE HEIGHT (FLOOR TO TOP OF SIDE) |
86″ |
|
INSIDE LENGTH |
24′ |
|
OVERALL WIDTH W/EXTENSION |
109″ |
|
OVERALL LENGTH |
28′ 6″ |
|
STANDARD BOX OVERALL HEIGHT |
101″ |
|
FRONT UNLOAD BOX CAPACITY |
1228 cu. ft. |
|
FRONT & REAR UNLOAD BOX CAPACITY |
1248 cu. ft |
|
WEIGHT – FRONT UNLOAD BOX |
8880# |
|
WEIGHT – FRONT & REAR UNLOAD BOX |
9080# |
|
APRON CHAIN – FRONT UNLOAD BOX |
667XH - STANDARD |
|
APRON CHAIN – FRONT & REAR UNLOAD BOX |
667XH - STANDARD |
|
CROSS FEED – HD 7-4 |
-
2″ WIDE – CA550 CHAIN WITH WELDED SLATS
-
RIGHT OR LEFT HAND DISCHARGE
|
|
UNLOADING BEATERS |
-
3 – 18″ – 4 BAR SPIRAL
-
EVEN FEED
|
|
FRONT DRIVE SEQUENCE |
-
LARGE GEAR BOX WITH TAPPERED BEARINGS & BRONZE WORM GEAR #100 ROLLER CHAIN
-
1¾″ MAIN APRON DRIVE SHAFT
|
|
EMERGENCY STOP CLUTCH |
STANDARD |
|
REAR UNLOAD DRIVE |
HYDRAULIC |
|
REAR UNLOAD SPEED |
UNLOAD TIME IS DEPENDENT ON TRACTOR R.P.M., HYDRAULIC PRESSURE AND G.P.M. |
|
REAR ENDGATE |
AUTOMATIC LOCK AND UNLOCK |
|
ROOF |
OPTIONAL |
|
REAR GATE DELAY |
OPTIONAL |
|
26′ |
|
|
INSIDE WIDTH |
7′ 4″ |
|
INSIDE HEIGHT (FLOOR TO TOP OF SIDE) |
86″ |
|
INSIDE LENGTH |
26′ |
|
OVERALL WIDTH W/EXTENSION |
109″ |
|
OVERALL LENGTH |
30′ 6″ |
|
STANDARD BOX OVERALL HEIGHT |
101″ |
|
FRONT UNLOAD BOX CAPACITY |
1333 cu. ft. |
|
FRONT & REAR UNLOAD BOX CAPACITY |
1353 cu. ft. |
|
WEIGHT – FRONT UNLOAD BOX |
9340# |
|
WEIGHT – FRONT & REAR UNLOAD BOX |
9540# |
|
APRON CHAIN – FRONT UNLOAD BOX |
667XH - STANDARD |
|
APRON CHAIN – FRONT & REAR UNLOAD BOX |
667XH - STANDARD |
|
CROSS FEED – HD 7-4 |
-
2″ WIDE – CA550 CHAIN WITH WELDED SLATS
-
RIGHT OR LEFT HAND DISCHARGE
|
|
UNLOADING BEATERS |
-
3 – 18″ – 4 BAR SPIRAL
-
EVEN FEED
|
|
FRONT DRIVE SEQUENCE |
-
LARGE GEAR BOX WITH TAPPERED BEARINGS & BRONZE WORM GEAR #100 ROLLER CHAIN
-
1¾″ MAIN APRON DRIVE SHAFT
|
|
EMERGENCY STOP CLUTCH |
STANDARD |
|
REAR UNLOAD DRIVE |
HYDRAULIC |
|
REAR UNLOAD SPEED |
UNLOAD TIME IS DEPENDENT ON TRACTOR R.P.M., HYDRAULIC PRESSURE AND G.P.M. |
|
REAR ENDGATE |
AUTOMATIC LOCK AND UNLOCK |
|
ROOF |
OPTIONAL |
|
REAR GATE DELAY |
OPTIONAL |
|
22′ |
|
|
INSIDE WIDTH |
7′ 4″ |
|
INSIDE HEIGHT (FLOOR TO TOP OF SIDE) |
86″ |
|
INSIDE LENGTH |
22′ |
|
OVERALL WIDTH W/EXTENSION |
109″ |
|
OVERALL LENGTH |
26′ 6″ |
|
STANDARD BOX OVERALL HEIGHT |
101″ |
|
FRONT UNLOAD BOX CAPACITY |
1123 cu. ft |
|
FRONT & REAR UNLOAD BOX CAPACITY |
1143 cu. ft. |
|
WEIGHT – FRONT UNLOAD BOX |
8420# |
|
WEIGHT – FRONT & REAR UNLOAD BOX |
8620# |
|
APRON CHAIN – FRONT UNLOAD BOX |
667XH - STANDARD |
|
APRON CHAIN – FRONT & REAR UNLOAD BOX |
667XH - STANDARD |
|
CROSS FEED – HD 7-4 |
-
2″ WIDE – CA550 CHAIN WITH WELDED SLATS
-
RIGHT OR LEFT HAND DISCHARGE
|
|
UNLOADING BEATERS |
-
3 – 18″ – 4 BAR SPIRAL
-
EVEN FEED
|
|
FRONT DRIVE SEQUENCE |
-
LARGE GEAR BOX WITH TAPPERED BEARINGS & BRONZE WORM GEAR #100 ROLLER CHAIN
-
1¾″ MAIN APRON DRIVE SHAFT
|
|
EMERGENCY STOP CLUTCH |
STANDARD |
|
REAR UNLOAD DRIVE |
HYDRAULIC |
|
REAR UNLOAD SPEED |
UNLOAD TIME IS DEPENDENT ON TRACTOR R.P.M., HYDRAULIC PRESSURE AND G.P.M. |
|
REAR ENDGATE |
AUTOMATIC LOCK AND UNLOCK |
|
ROOF |
OPTIONAL |
|
REAR GATE DELAY |
OPTIONAL |
|
Back
|
|
|
|
Address:
