|
|
|
|
Documents:
Videos:
|
|
|
INFORMATION DETAILS
ID: 16709055
|
Year: 2020
|
Make: H&S
|
Model: 3100 Series
|
Type: New
|
| MSRP:
N/A |
Engine Size - cc: N/A |
SELLER DESCRIPTION
|
Features
|
-
High Clearance Action Rakes features a “KWIK PIK” (patent pending) system for immediate clearance of windrows when raised, as well as greater clearance in the raking position and stability during transport.
-
An Adjustable Hitch allows you to level the rake for efficient raking.
-
Right and left side raking is done easily by turning either one of the wing transport valves off.
-
A 49″ Center Kicker Wheel is optional on all Action Rakes.
-
The hitch jack is used to adjust the windrow width as shown.
-
Raking width is easily adjusted by a single pin & clip, and can be fine-tuned with the threaded turnbuckle screw.
-
The spring suspension system allows each rake wheel to float independently over the ground. The down pressure for ALL the wheels on each side is done by a single a single hand crank.
|
|
OPTIONS |
 A 49″ Center Kicker Wheel is optional on the 1100, 2100, and 3100 Series Rakes. |
|
Specifications
|
|
3108 |
|
|
NUMBER OF WHEELS |
8 |
|
WHEEL DIAMETER |
60″ |
|
TEETH PER WHEEL |
40 |
|
TOOTH DIAMETER |
7.5mm |
|
RAKE WHEEL HUBS |
Tapered Bearings |
|
TRANSPORT WIDTH |
10′ |
|
TRANSPORT LENGTH |
19′ |
|
TRANSPORT HEIGHT IN TRANSPORT POSITION |
86″ |
|
RAKING WIDTH |
15′ - 19′ |
|
WINDROW WIDTH ADJUSTMENT |
3′ - 5′ |
|
NO. OF RAKING POSITIONS |
6 |
|
GROUND PRESSURE RAKE WHEEL ADJUSTMENT |
Independent wheel flotation with single side adjustment crank |
|
ACTION CYLINDER - RAISE/LOWER |
4 ½″ |
|
WING CYLINDERS |
2″ |
|
JACK |
Standard |
|
WEIGHT |
1,800# |
|
CENTER KICKER WHEEL |
Optional |
|
TRANSPORT WHEELS |
(2) - ST205/75D15 |
|
ADJUSTABLE BALL HITCH |
Optional |
|
|
|
|
3110 |
|
|
NUMBER OF WHEELS |
10 |
|
WHEEL DIAMETER |
60″ |
|
TEETH PER WHEEL |
40 |
|
TOOTH DIAMETER |
7.5mm |
|
RAKE WHEEL HUBS |
Tapered Bearings |
|
TRANSPORT WIDTH |
10′ 8″ |
|
TRANSPORT LENGTH |
21′ |
|
TRANSPORT HEIGHT IN TRANSPORT POSITION |
101″ |
|
RAKING WIDTH |
18′ - 22′ |
|
WINDROW WIDTH ADJUSTMENT |
3′ - 6′ |
|
NO. OF RAKING POSITIONS |
10 |
|
GROUND PRESSURE RAKE WHEEL ADJUSTMENT |
Independent wheel flotation with single side adjustment crank |
|
ACTION CYLINDER - RAISE/LOWER |
4 ½″ |
|
WING CYLINDERS |
2″ |
|
JACK |
Standard |
|
WEIGHT |
2,000# |
|
CENTER KICKER WHEEL |
Optional |
|
TRANSPORT WHEELS |
(2) - ST205/75D15 |
|
ADJUSTABLE BALL HITCH |
Optional |
|
|
|
|
3112 |
|
|
NUMBER OF WHEELS |
12 |
|
WHEEL DIAMETER |
60″ |
|
TEETH PER WHEEL |
40 |
|
TOOTH DIAMETER |
7.5mm |
|
RAKE WHEEL HUBS |
Tapered Bearings |
|
TRANSPORT WIDTH |
12′ |
|
TRANSPORT LENGTH |
23′ |
|
TRANSPORT HEIGHT IN TRANSPORT POSITION |
105″ |
|
RAKING WIDTH |
20′ - 24′ |
|
WINDROW WIDTH ADJUSTMENT |
3′ - 6′ |
|
NO. OF RAKING POSITIONS |
10 |
|
GROUND PRESSURE RAKE WHEEL ADJUSTMENT |
Independent wheel flotation with single side adjustment crank |
|
ACTION CYLINDER - RAISE/LOWER |
4 ½″ |
|
WING CYLINDERS |
2″ |
|
JACK |
Standard |
|
WEIGHT |
2,250# |
|
CENTER KICKER WHEEL |
Optional |
|
TRANSPORT WHEELS |
(2) - ST205/75D15 |
|
ADJUSTABLE BALL HITCH |
Optional |
|
Back
|
|
|
|
Address:
