|
|
|
|
Documents:
|
|
|
INFORMATION DETAILS
ID: 16709061
|
Year: 2020
|
Make: H&S
|
Model: M9 Merger
|
Type: New
|
| MSRP:
N/A |
Engine Size - cc: N/A |
SELLER DESCRIPTION
|
Features |
|
M9 Merger
-
The M9 merger features a 9′ pick-up head with independent head flotation.
-
The 42″ cross conveyor allows for hi-capacity of crop discharge.
-
All H&S Mergers feature an anti-wrap guard (patented) on the cross conveyor bearings to protect against material wrapping on the shafts and destroying bearings.
-
Replaceable three prong plastic teeth handle the crop gently and the high rear panel prevents spillage over the back.
-
The pick-up head crop roller is adjustable for height and tension.
-
Cross conveyor speeds up when pickup speed is increased.
-
By switching the 2 easy quick disconnect hoses around, you can change from right side merging to left side merging or inverting with the optional inverter shield.
-
Storage for the inverter shield is out of the way behind the machine.
-
The rear swivel tail wheel has a brake assembly that can easily be tightened by a single bolt for severe field conditions or transport.
-
The pick-up head crop roller is adjustable for height and tension.
-
Taillights are standard equipment.
-
An optional self-contained hydraulic drive kit with PTO pump can be installed on the M9 Merger. This feature allows tractors with a minimum 5 g.p.m. hydraulic capacity and 1 remote to operate the merger.
-
An optional 2′ extension or accelerator roller (patented) fluffs windrows. Both options allow you to merge up to 14′ cuts of hay windrowed up to 9′.
|
|
Features
|
Anti Wrap Guard
H&S Mergers feature an anti-wrap guard (patented) on the cross conveyor bearings to protect against material wrapping on the shafts and destroying bearings.
|
Crop Roller
The pick-up head crop roller is adjustable for height and tension.
|
Cross Conveyor
A heavy duty 42″ wide, ribbed cross conveyor easily accommodates the massive flow of material.
|
Gauge Wheel
The gauge wheels and Hydra-Swing Crop Roller are easily set to crop conditions just by removing and replacing the pins in the desired setting.
|
Right To Left
By switching the 2 easy quick disconnect hoses around, you can change from right side merging to left side merging or inverting with the optional inverter shield.
|
|
Swivel Tail Wheel
The rear swivel tail wheel has a brake assembly that can easily be tightened by a single bolt for severe field conditions or transport.
|
|
OPTIONS |
 The optional accelerator roller (patented) fluffs windrows and allows you to merge up to 14′ cuts of hay windrowed up to 9′. |
 An optional self contained hydraulic drive kit with P.T.O. pump can be installed on the H&S M-9 Merger. This feature allows tractors with a minimum 5 G.P.M. hydraulic capacity and 1 remote to operate the merger. |
 Storage for the inverter shield is out of the way behind the machine. The optional left side inverter shield can easily be mounted on the M9 Merger. |
|
Specifications
|
|
|
|
M9 Merger |
|
|
BASE UNIT WIDTH |
14′4″ |
|
BASE UNIT HEIGHT |
4′6″ |
|
BASE UNIT LENGTH |
19′3″ |
|
BASE UNIT WIDTH w/ACCELERATOR ROLLER |
15′9″ |
|
BASE UNIT WIDTH w/OPTIONAL 2' CONVEYOR EXTENSION |
16′4″ |
|
BASE UNIT WEIGHT |
2970 LBS. |
|
BASE UNIT WEIGHT - SELF CONTAINED UNIT |
3380 LBS. |
|
TIRE SIZE (FRAME) |
6.70 X 15 |
|
TIRE SIZE (PICKUP |
5.70 X 8 |
|
PICKUP WIDTH |
9′ |
|
REPLACEABLE THREE PRONG PLASTIC TEETH |
YES |
|
CROSS CONVEYOR WIDTH |
42″ |
|
TRACTOR SIZE AND HYDRAULIC CAPACITY REQUIRED STANDARD UNIT |
MIN. - 70 H.P. w/16 G.P.M./2000 P.S.I. |
|
TRACTOR SIZE AND HYDRAULIC CAPACITY REQUIRED WITH SELF CONTAINED UNIT |
MIN. - 70 H.P. w/5 G.P.M./2000 P.S.I. |
|
HYDRAULIC REMOTES NEEDED - STANDARD UNIT |
2 |
|
HYDRAULIC REMOTES NEEDED - SELF CONTAINED UNIT |
1 |
|
Back
|
|
|
|
Address:
