|
|
|
INFORMATION DETAILS
ID: 33633770
|
Year: 2016
|
Make: Hustler Equipment
|
Model: Chainless 2000
|
Type: New
|
| MSRP:
N/A |
Engine Size - cc: N/A |
SELLER DESCRIPTION
|
Chainless 2000
A self-loading 3-point-linkage mounted Chainless bale feeder suitable for feeding out all square bales, tight and loose round bales and it maximises feed use. Ideal for farms feeding
|
|
Features
|
|
 Feeds almost any bale
Feeds out both rounds and squares easily – Doesn’t matter which way the bale goes on - Feeds balage, Hay, Straw, etc
|
 Paddles
Paddles on lower drum help when feeding out sloppy bales.
|
|
Rotors
Top rotor turns 3 times faster than bottom rotor – excellent teasing action provides fluffed up windrow reducing wastage > No troublesome feed chains to jamb, stretch or break > Fully enclosed drive transmission protected from damage > Paddles for handling even the sloppiest of bales > Spiral timed teeth makes for smooth running
|
 Teeth
Rotor teeth release the feed off the taper at the correct point. They’re also self cleaning so hay doesn’t get jammed between the timed rotors
|
 Low maintenance drive
Heavy duty hardened 1” drive pins > 400cc motor > Outboard bearing blocks are in a good position to keep clean and greased > Automatic drive chain tensioners mean no adjustment are necessary > self aligning bearings are free running and protected behind drive covers
|
|
 Freeflow wiper
Prevents long chop bales from jamming > Requires less power to drive due to free flowing design > Adjustable to suit any preference of feeding and allow additional reach
|
|
 Adjustable platform height
Infinitely variable bale pressure control from inside the cab allows you to feed out the tightest bale cores or the sloppiest of bales > Built in height guides for easy feeding > Safety latch so operators can’t drive out while platform is up > For different bale types blank bars or bars with more aggressive teeth are available
Infinitely variable bale pressure control from inside the cab allows you to feed out the tightest bale cores or the sloppiest of bales > Built in height guides for easy feeding > Safety latch so operators can’t drive out while platform is up > For different bale types blank bars or bars with more aggressive teeth are available - See more at: http://www.hustlerequipment.co.nz/balefeeders/chainless-2000/#sthash.IBCXvScn.dpuf
|
|
 Bale Security
The high rear bar means the bale cannot screw off the back on hills and is now stronger to handle heavier bales
|
|
 Floor
Fully enclosed – no wastage of expensive feed > Polyethylene is impervious to UV, non corrosive, slipery to reduce drag and drive power, easily repairable and very shock resistant > Built in bale guides to keep bales tracking straight
|
|
 Easy Loading
Super low cradle is easy to load with 3PTL and means you don’t rely on a front end loader (FEL) > Right tyne is longer than the left so easy to reconnect to the cradle > Slotted top link hole so linkage can float when reconnecting > Cat 1 & cat 2 mounting points
|
|
 Feet
Designed for minimal damage to wet ground
|
|
 Weight
490kg is the lighter components allow a greater strength to weight ratio. This is achieved by using high grade steel (50% stronger than mild steel) and clever engineering > High hook position means the weight is distributed across 3 points and the strain comes off the ends of the tines
|
Back
|
|
|
|
Address:
