|
|
|
INFORMATION DETAILS
ID: 33633775
|
Year: 2016
|
Make: Hustler Equipment
|
Model: SL350
|
Type: New
|
| MSRP:
N/A |
Engine Size - cc: N/A |
SELLER DESCRIPTION
|
SL350
A self-loading 3-point-linkage mounted Chain bale feeder suitable for feeding out a wide variety of mainly round bales and silage along with some square bales when using the optional side bars. The SL-350 is ideally suited for farms feeding 50-800 bales each year.
|
|
Features
|
|
 Strongest bars
Bars are 4-5 times stronger torsionally than angle type bars of same size. We’ve bolted them to the chain which is stronger and for different bale types blank bars or bars with more aggressive teeth are available and can simply be bolted on in a matter of minutes.
|
 Toughest chain
Zinc plated chains rated to 12 000lb each and with the heavy duty rollers and pins make our chain drive system almost twice as strong as our competitors. And the greater surface on each roller pin increases chain life because they can’t stretch or snake.
|
 Low maintenance bearings
Protected double sealed heavy-duty 4-bolt bearings with trash shields are mounted outboard of the feeding chamber, which makes them last longer than internally mounted bushes.
|
 Enclosed sprockets
Our 6 tooth sprockets are made from Bisalloy (the same material a bulldozer blade is made from) so they last forever. With smaller diameter sprockets less torque is required to drive the chains, giving more drive power for tough bales. Designed so it is impossible for chain to jump off the sprocket saves you downtime in the field.
|
 Rope guide
The unique rope guide makes disconnection easy because of a direct pull of the rope on the latch. It also keeps the rope out of the way of the tractor tyre.
|
|
 Polyethylene floor
Fully enclosed extruded polyethylene floor reduces feed waste and it will never corrode. Being polyethylene it is slippery with 30% less drag compared to steel which makes feeding sticky silage or wet bales easy.
|
|
 Bale chamber
Increased front and rear bale support reduces feed falling out and a high back bar keeps the bale in the chamber when operating on steep terrain.
Infinitely variable bale pressure control from inside the cab allows you to feed out the tightest bale cores or the sloppiest of bales > Built in height guides for easy feeding > Safety latch so operators can’t drive out while platform is up > For different bale types blank bars or bars with more aggressive teeth are available - See more at: http://www.hustlerequipment.co.nz/balefeeders/chainless-2000/#sthash.IBCXvScn.dpuf
|
|
 High hook & hardened drive
A high mounted connection hook creates a large triangle of strength reducing the stress on the loading tynes. And the hardened drive connection is built to last.
|
|
 Unequal length tynes
Unequal length tynes make connecting the feeder easy. You’ll only need to line up one tyne, then back straight in.
|
|
 Ultra low cradle
Ultra low cradle for loading.
|
|
 Dual side feed
A single level control enables the SL-350 to feed bales out to the left or right and gives precise control of the feed rate
|
Back
|
|
|
|
Address:
