2022, New heavy duty 11L x 15, 12 ply tires with a load capacity of 4000 lbs. Cut directly in-line with the tractor or at any offset distance up to 122” (10.16ft) Large 2-1/2” castor pivot shaft 6000 lb capacity 6 bolt hubs Spring steel tension bushings and induction hardened pins at major pivot points Minimum of 3 hydraulic circuits required to operate the FLEX ARM with a 15’ or 10’ mower If independent wing lift is required on 15’ mower then 4 hydraulic circuits or optional _selector valve kit is required Heavy duty 3-1/2 X 36 welded hydraulic cylinder Weight of the FLX-1510 is 2557 lbs Safety lighting kit Bolt-in replaceable axles Easily detached from the rotary cutter by disconnecting the hitch and the stabilizer strut Continuous power rating of 200HP at 1000 RPM Accommodates 540 or 1000 RPM power delivery from the tractor Optional 6 port selector valve kit for independent wing action or limited tractor hyd. outlets Transport widths: Arm & rotary cutter. 70” to the left of the tractor and 52” to the right for a total of 121” Arm alone. 70” to the left of the tractor and 47” to the right for a total of 117” Arm & rotary cutter with stop block installed on the transport lock bar. 55” to the left of the tractor and 66” to the right. In this configuration the arm is 19” off center. The stop block can be installed whe
Stock Number :4750