40km/hr with ECO mode, boom suspension with on/off switch, extra 325 counter weight, flat face couplers at auxiliary, pressure release at auxiliary to make hose hookup and disconnections effortless, 150 L/min oil flow with flow sharing hydraulics, reversing fan, dynamic load moment controll automatic grease system by SKF, AC, Radio and Grammer air suspension seat. New grapple bucket available too.

Standard equipment telescopic wheel loader 8620 t-3

• 4-cylinder diesel engine Deutz TCD 3.6, 75 kW (102 HP) / 95 kW (129 HP)
• DOC, DPF and SCR for compliance with Stage V emissions standards
• ECO Mode
• Combined oil cooler with hydraulic fan drive
• 2-stage air cleaner with highly efficient pre-cleaner system
• Hydrostatic four wheel drive with automotive control
• High-pressure drive HD-plus
• Tyres 18-22.5 MP590, offset -50
• HTF (High Traction Force), SPT (Schäffer Power Transmission)
• Planetary axles HD with limited slip differentials, 8 hole
• Multiple disk brake, maintenance free; service and parking brake
• Maintenance free articulation joint, 2 steering cylinders, rear pendulum axle

• Z-bar boom with parallel lift
• Ferro-form sliding elements in the telescopic arm
• Headstock type wheel loader with hydraulic tool lock
• Comfort Cab PLUS
• 10" touch screen, mobile phone holder
• Radio preparation
• Electronic SRS joystick (aggressive, smooth)
• Selectable user profiles of the working hydraulics (fast, medium, slow)
• Steering column adjustable in height and tilt by foot pedal
• LED working headlights: 2 x front, 1 x rear
• Lighting system without ABE (General approval certificate) according to ordinance StVZO
• Sockets: USB-A and USB-C, 3-pin Euro, 12 V vehicle

• Soft touch operating station for working lights and windscreen wipers
• Rear window heater
• Wide-angle and close-up mirrors
• Working hydraulics standard / options: 106 / 125 (stronger pump) / 172 l/min (Load Sensing)
• Dynamic load moment control according to DIN EN474-3
• Additional control unit can be operated electropropotionally using the joystick
• Electric locking latch for additional control unit on both sides
• Switchable end-position cushioning of the cylinders (stroke, tool, tele)
• Electric pressure relief of hydraulic couplings (on the steering tower and telescopic arm)
• Depressurised return

Technical data telescopic wheel loader 8620 t-3

• Engine
  • Type: 4-cylinder diesel engine Deutz TCD 3.6
  • Output: 75 kW (102 HP) / 95 kW (129 HP)
  • Exhaust gas treatment / emission level: DOC, DPF, SCR / V
• Tyres
  • Standard tyres: 18-22.5 MP590, ET-50
  • Option I: 400/70-20 AS
  • Option II: 500/60-22.5 AS, ET-50 installed on this machine
  • Option III: 600/40-22.5 AS, ET-50
• Electric system
  • Operating voltage: 12 V
• Drive
  • Traction hydraulics: Hydrostatic-automotive
  • Axles: Dana HD axles, 8-hole rim; planetary final drive and automatic slip-control differential, swing axle at rear
  • Speed / option: 0 - 20 kph in 2 gears switchable under load / 0 - 40 kph this machine 40K
• Brakes and steering
  • Service braking system: Combined brake hydrostatic and multi-disc brake
  • Parking brake: Multi-disc brake running in oil bath
  • Steering: Fully hydraulic articulated steering
• Tank capacity
  • Fuel: 150 l
  • Hydraulic oil: 130 l
• Working hydraulics
  • Delivery rate: from 106 l/min
  • Operat. pressure: 220 bar
• Weights
  • Operating weight cabin incl. Original tyres, driver and standard bucket: 7,050 - 7,950 kg
  • Lifting capacity: 4,200 kg
  • Tipping load, straight, pallet fork acc. to ISO 8313: 5,480 kg
• Sounds and vibration
  • Sound pressure level LpA: 71 db(A)
  • Sound power level guaranteed LwA: 102 db(A)
  • Sound power level equivalent LwA: 101 db(A)
  • Hand/arm vibration acc. to ISO 8041: <2,5 m/s²
  • Total body vibration acc. to ISO 8041: <0,5 m/s²

• Dimensions see attached pictures
  • (A) Wheelbase: 2,535 mm
  • (B) Chassis length: 5,114 mm
  • (C) Overall length with standard bucket: 6,031 mm
  • (D) Digging depth: 75 mm
  • (E) Max. working height: 2,660 mm
  • (F) Swivelling point, telescopic arm retracted: 4,085 mm
  • (G) Loading height with pallet forks: 4,960 mm
  • (H) Max. dumping height: 4,350 mm
  • (I) Front end height: 1,910 mm
  • (J) Dumping width: 650 mm
  • (K) Seat height: 1,660 mm
  • (L) Cab height: 2,770 mm
  • (M) Max. bucket pivot point: 5,200 mm
  • (N) Overall width / option: 2,080 / 2,050 - 2,230 mm
  • (O) Inner turning radius: 2,310 mm
  • (P) Outer turning radius: 4,390 mm
  • (Q) Outer radius with standard bucket: 4,920 mm